Gehl Introduces Power2 Skid Loaders

Model 4640E and 5240E Power2 skid loaders from Gehl feature a 68 hp Yanmar Interim Tier IV diesel engine that produces up to 180 ft-lbs of torque. The 59.7-inch-wide loaders (offset tire package available) can lift 2,050 pounds over 121 inches when equipped with 12.00 tires and optional counterweight. 800/628-0491; www.gehl.com.

 

Zoeller Introduces Grinder Package System

The 915 Shark grinder package system from Zoeller Pump Co. is designed for new as well as retrofitting typical package sewage ejectors. The complete package system, which includes alarm and check valve, reduces installation time and eliminates the need to purchase miscellaneous pieces. 800/928-7867; www.zoellerpumps.com.

 

Liberty Pumps Introduces 290 Series

The 290 Series of effluent pumps from Liberty Pumps features a one-piece, cast-iron motor housing and base, stainless steel rotor shaft and permanently lubricated upper and lower ball bearings. The pump series delivers heads to 48 feet and maximum flows of 85 gpm. Features include a 1 1/2-inch discharge and 1/2-inch solids-handling capacity, and cord lengths of 10, 25, 35 and 50 feet, depending on model. 800/543-2550; www.libertypumps.com.

 

Orenco Introduces AX-Max Treatment Systems

AX-Max and AX-Mobile treatment units from Orenco Systems use recirculating media filters for clear, odorless effluent with thorough nutrient-reduction, suitable for irrigation or surface discharge after disinfection. AX-Max units, for larger commercial/municipal systems, measure up to 42-by-8.5 feet. The containerized, fully-plumbed plug-and-play system can be installed above or below ground, in multi-unit arrays and in harsh climates. It reduces nitrogen up to 90 percent, depending on configuration. When installed as a two-stage system it can virtually eliminate ammonia. The system processes up to 5,000 gpd of raw sewage or 15,000 gpd of primary treated effluent and uses less than 2 kWh per 1,000 gallons treated, making it LEED-eligible. AX-Mobile can be used for remote, temporary or mobile applications. 800/348-9843; www.orenco.com.