Versatile alarm

The Versa’larm from Alderon Industries is an expandable multizone alarm with two sets of auxiliary contacts. Multiple indicator lights allow users to differentiate between alarm conditions such as high water or a plugged effluent filter. The alarm can be expanded to monitor other flood-prone areas such as sump pits, floor drains, washing machines or water heater and condensate overflow pans.

Any combination of float switches, effluent filter switches or water sensors can be mixed and matched for complete coverage. An auto-dialer option will call up to four phone numbers when any of the sensors are activated and notify the operator of the alarm condition. The alarm can be connected to an existing building automation system (BAS) or security system. A two-channel auto-dialer can create two different messages to differentiate between specific alarm conditions. 218/483-3034; www.alderonind.com.

No-float sensor

No Float control panels from Clarus Environmental offer a variety of options in one panel. The panels use a no-float sensor that detects the liquid level in the tank and send a signal back to the panel, where it is digitally displayed in inches inside the front cover. The sensor takes the place of up to four floats and has an operating range of up to 40 feet.

Pump activation and alarm levels are easily adjusted in the panel. Mechanical float switches can be added for redundant off and high-water alarm conditions. The panels are available in simplex and duplex configurations. The simplex panel is easily programmed in the field and uses a timed-dose panel, while the duplex panel is for demand-dose applications only. 800/928-7867; www.clarusenvironmental.com.

Subdoor control panel

The RK Series control panel from CSI Controls has a NEMA 4X panel design incorporating standard features into the circuit board, subdoor and raised back panel. Located on the subdoor, the float indication lights allow the user to see the status of each float and flash should a float fail. The subdoor control center features control and alarm circuit power, high level, lag pump on, lead pump on, alarm, pump run, test/silence pushbutton, hand/run pushbutton, and digital display for viewing system information (optional).

Standard features include lockable latches, a flashing red alarm light with an electronic horn, a touch-to-silence pad, circuit breakers, start components, contactors, and a terminal strip. Single-phase and three-phase simplex and duplex models are available. The panels are UL/cUL listed. 800/363-5842; www.csicontrols.com.

Pump control panel

The Aquaworx IPC panel from Infiltrator Systems provides a cost-effective approach to pump control. Easy to install and use, the panel monitors liquid levels, controls pumping time intervals, and logs events in real time. No tape measures or stopwatches are required. The panel features an embedded microprocessor in the pump controller and a floatless pressure transducer in the pump chamber that leverages simple pressure transducer technology to enhance performance.

Using a mountable and removable controller (MARC) to collect system data, the IPC panel monitors multiple types of system events with a date-and-time stamp, liquid level at the time of the event, and the event type. It can store up to 4,000 events including doses, power up, power down, manual run, and alarm events. Data is transferred from the MARC to PC-based applications using an SD card. The MARC allows the option of removing the unit for use on multiple IPC panels. If the MARC is removed from the panel, unauthorized users cannot change or override panel settings. 800/221-4436; www.aquaworx.com.

Pre-wired panel

Model 195 Econoline pre-wired electrical control panels from Jet Inc. are designed to monitor operation of the system aerator, as well as the function of a pump for various pressure distribution system applications. The panels are designed for cost-effective demand- or timed-dosing spray systems with integrated controls and high-water alarm circuits. Standard features provide complete system operation and monitoring when combined with optional equipment for each specific installation. 800/321-6960; www.jetincorp.com.

Easy install alarm

The LB50 indoor/outdoor 115-volt alarm from Ohio Electric Control features normally open or normally closed control switches and offers easy installation. The unit is fused for circuit protection and includes a three-position toggle switch (operate/test/silence), to select visual and audible alarms. The alarm is designed for home sewage systems, as a remote alarm for commercial systems or lift stations, and for alarming an auxiliary contact. It can be used in holding tanks to detect high and low water. 419/289-1553; www.oecinc.net.

Four-in-one panel

The four-in-one MVP-S1/2DM control panel from Orenco Systems supports numerous electrical configurations and dosing schedules in a single control panel. It can be configured in the field for timed or demand dosing. While the control circuit operates on 120V power, the pump is dual-rated for 120V or 240V power.

The control panel has a programmable logic unit with multiple timing intervals for changing flow conditions and a built-in elapsed time meter and counter. The PLC displays float position and has a float error indicator. A reference chart appears inside the unit to assist with troubleshooting during installation and testing. The control panel is compatible with many types of systems, from new installs to older panels needing replacement. 877/488-3594; www.orenco.com/controls.

Indoor alarm

The Polylok PL-WTA (septic tank) or PL-WSA (effluent filter) indoor alarm system provides audio/visual warning of potential threatening liquid level conditions in lift pump chambers, sump pump basins, effluent filters and other water applications. It features a battery-operated wireless transmitter that is placed in the tank up to 150 feet away from the alarm.

When the alarm float switch activates, the transmitter sends a signal and sounds the indoor alarm, warning of a potentially threatening level condition. The horn can be silenced, but the alarm light remains on until the condition is remedied. Once the condition is cleared, the alarm will automatically reset. 877/765-9565; www.polylok.com.

Aerator timer

The P101FA-2 timer from Septic Services is designed for Flagg-Air 340 hp aerators and can be used for any application that requires 7-amp shut-off capability. The lightweight, compact unit is designed for indoor and outdoor use and is constructed with weather-resistant high-impact plastic.

The 24-hour timer prevents overload on the aerator motor if the aerator becomes obstructed with debris and is adjustable in 15-minute increments to meet local codes for aerator operating procedures. The 115-volt, 7-amp unit is easy to install and use. It has a three-position toggle switch (on/auto, off, continuous), warning light and reset button all located on the front of the unit. The unit weighs 3 pounds and measures 6 inches by 8 inches by 4 3/4 inches. 800/536-5564; www.septicserv.com/store.

Exterior pump control

The JJ1CB 120-volt exterior pump control with exterior alarm from Septronics only needs one line of power. A mini break is located in the junction box, allowing the alarm to continue functioning if the pump shorts or fails. The alarm can be silenced and the light will stay illuminated until the condition is resolved.

All components sit up on a high-impact poly pedestal to protect the wiring and provide a convenient area to connect through to the tank. The pipe nipple and locknuts are included. Wires can be brought up through the cord seals (included) into a sealed junction box. The exterior alarm comes with a control float switch, which is wired into the terminal strip. 262/567-9030; www.septronics.com.

System programming

The EZ Series In-Site CL control panel from SJE-Rhombus is designed to control one or two 120/280/240V single-phase pumps in water and sewage installations. It features a Modbus port located on the inside door to quickly connect to a Windows-based PC to download system events, including pump run times, pump cycles, alarm conditions, HOA settings, power outages, and service calls. The included software automatically formulates system data, up to 4,000 events, creating easy-to-read reports.

The control panel features a NEMA 4X weatherproof enclosure, lockable latch, audible/visual alarm, external alarm test/silence switch, auxiliary alarm relay, circuit breaker, transformer, pump run and tank level indicators, control and alarm power indicators, and a large terminal strip. The panel uses the floatless C-Level sensor and is available for simplex and duplex, demand-dose and timed-dose applications (it can be converted in the field). An optional mounting post features a removable access for easier wiring and can be mounted directly into the ground, over a 4x4, or conduit. Each panel is UL/cUL listed. 888/342-5753; www.sjerhombus.com.

High-water alarm

The Observer 200 from SPI – Septic Products Inc. is an indoor high-water alarm. Features include a durable thermoplastic enclosure rated for indoor use, red alarm light, green power-on light, 85 decibel horn, auxiliary dry contacts, and alarm test and horn silence buttons. A battery backup allows the alarm to continue working during power outages. An external quick-connect terminal block allows for easy alarm float installation (a mechanical float with 15-foot cord included). 419/282-5933; www.septicproducts.com.