Clarus Environmental Spider Valve assembly

The Spider Valve assembly from Clarus Environmental is designed for effluent distribution when regulations require pressure splitting or when a small lot requires lateral lines of unequal length. The valve is available in models that range from two to 10 laterals and mounts in a 24-inch-diameter access riser. The 2-inch-diameter Schedule 80 PVC manifold has an accessible clean-out for equal pressurization and maintenance. Each valve assembly includes 5/32-inch predrilled washers and union. 800/928-7867; www.clarusenvironmental.com.

Water Cannon jetter package 

The XT jetter package from Water Cannon delivers up to 5.5 gpm and pressure to 4,200 psi. It functions as a drain cleaner and high-power pressure washer. Powered by a Honda GX 630 engine, it is available with an Annovi Reverberi or General Pump. Features include pulsation on demand, adjustable throttle control from 100 psi and up and ball valve shut-off. The 15-gallon fuel tank, electric key start and portable wheel kit are included. Accessories include Hosetract hose reel to handle 300 feet of 3/8-inch Piranha jetter hose, 125 feet of 1/4-inch hose and four stainless steel nozzles. 800/333-9274; www.watercannon.com.

HBC-radiomatic linus 4 transmitter 

The updated linus 4 transmitter from HBC-radiomatic is available with two joysticks (up to four steps) or four stepless levers in combination with push buttons, toggle switches or rotary switches. The transmitter weighs approximately 2 pounds with battery and has an LED to indicate operating/battery status. Options include radiomatic infrakey, tandem operation, pitch-catch and micro/orthogonal drive. 800/410-4562; www.hbc-radiomatic.com.

Infiltrator IM-540 septic tank

The IM-540 septic/pump tank from Infiltrator Systems, designed to be lightweight, durable and watertight, features an injection-molded, plastic IM, two-piece design. The IM tank replaces the company’s TW-300 and TW-500 tanks. Applications include pump tank, in-series tank, trash/septic tank and rainwater tank. Features include inboard lifting lugs, integral heavy-duty lids that connect with Infiltrator’s TW riser system, structurally reinforced access ports, structural ribbing and fiberglass bulkheads. Tanks can be installed with 6 to 48 inches of cover and pumped dry during pumpouts. No special installation, backfill or water filling is required. 800/221-4436; www.infiltratorsystems.com.