Check out the latest product offerings for the onsite wastewater treatment industry
Magline propulsion assist and lift system option
The CooLift. propulsion assist and lift system from Magline helps operators push a loaded lift over rough terrain or inclines. A throttle interlock minimizes accidental activation of the propulsion system. The center drive wheels automatically return to free-wheel mode when the throttle is released. A microprocessor control system with encoder feedback provides smooth, quiet operation. Lifting capacity ranges up to 1,500 pounds. 800/624-5463; www.magliner.com.
Clarus Environmental Fusion Series treatment systems
The Fusion Series treatment systems from Clarus Environmental are drop-in wastewater treatment units designed for use in decentralized applications where the effluent quality needs to meet or exceed secondary treatment standards. The Fusion is designed for use in residential, commercial and small community applications and is available in a variety of treatment capacities, from 450 gpd to 4,000 gpd. All models up to 800 gpd are NSF Std. 40 certified to produce an effluent quality of 9 mg/L CBOD5 and 9 mg/L TSS. The Fusion’s unique design enables it to be installed without a pretreatment tank, making it ideal for use on sites where space is limited. Effluent disposal options include conventional trenches, dosed systems, drip irrigation or disinfection with direct discharge. 800/928-7867; www.clarusenvironmental.com.
Franklin Electric grinder pumps
Little Giant GP Series grinder pumps from Franklin Electric operate across 208 to 230 volts. The GP-A (automatic) and GP-M (manual) models are designed to handle low-pressure sewage applications and feature a cutter system that operates at 414,000 cuts per minute. Other features include a nonclogging, corrosion-resistant brass impeller, a shut-off head of 130 feet, and a single-phase, capacitor start/run motor with built-in overload protection. 260/824-2900; www.littlegiant.com.
BAYCO Products LED angle lights
Nightstick LED angle lights (models XPP-5570R, XPR-5572R and XPR-5572RM) from BAYCO Products feature enhanced safety features, including a low-battery indicator, multiple power options and a “survival mode” that provides 20 lumens of light in emergency situations with a run time of 3.5 days. Each model is cULus- and MSHA-certified Intrinsically Safe Permissible, water-rated as IP-X7 waterproof and meets requirements of NFPA-1971-8.6. A stainless steel pocket clip eliminates slippage when attached to a jacket or respirator pack. Each model has three user-selectable settings of 200, 100 and 60 lumens plus a strobe feature with an 875-foot beam distance. 800/233-2155; www.baycoproducts.com.
Milwaukee Tool high-tension hacksaw
The 12-inch high-tension hacksaw from Milwaukee Electric Tool Corp. is designed for contractors who need to make fast, accurate cuts. A reinforced metal frame provides extra durability. A high-leverage tension knob at the top of the frame allows the user to tighten the blade to the highest tension needed. It features six-blade storage capacity and a 45-degree blade position for a better angle on flush cuts. 800/729-3878; www.milwaukeetool.com.
Xylem dewatering pump
The Flygt 2190 submersible dewatering pump from Xylem is built to handle abrasive liquids. The midsized pump is available with two impeller options: the Dura-Spin safeguards against wear by sweeping abrasive particles away from the impeller neck, while the semi-open impeller increases uptime by preventing fibrous solids from obstructing the pump. The pump’s conical trim sleeve restores clearances to near-original condition. 704/409-9700; www.xyleminc.com.
Hyundai Construction Equipment Americas hydraulic excavators
HX Series hydraulic excavators from Hyundai Construction Equipment Americas provide increased fuel economy over previous models. The HX140L is a 13-metric ton model powered by a Perkins 1204F Tier 4 Final engine rated at 116 hp and features a 39.4-inch-wide digging bucket. It achieves a maximum digging depth of 22 feet 1 inch and a maximum digging reach of 32 feet 9 inches with a digging force of 24,890 ft-lbs. The 24-metric ton HX235LCR excavator is a compact-radius model, featuring a Cummins QSB6.7 Tier 4 Final engine rated at 183 hp and 39.4-inch bucket. It can reach a maximum digging depth of 22 feet, maximum digging reach of 32 feet 6 inches, and a digging force of 37,104 ft-lbs. 877/509-2254; www.hceamericas.com.
Komatsu America Corp. wheel loader
The WA600-8 wheel loader from Komatsu America Corp. is designed to maximize production efficiency in loading off-highway trucks or load-and-carry applications. The 529 hp, Tier 4 Final certified engine improves power train and hydraulic efficiency and consumes up to 13 percent less fuel than its Tier 3 predecessor. It features a standard bucket capacity of 9.2 cubic yards. 847/437-5800; www.komatsuamerica.com.
Water Cannon electric pressure washer
The 15M71 electric-powered pressure washer from Water Cannon Inc. — MWBE has a 20 hp, 460-volt 3-phase motor with an auto start/stop feature that powers a TSP Series General triplex plunger pump and delivers 4.5 gpm at 6,000 psi using the poly chain drive system. It comes with 500 feet of high-pressure hose, gun/wand kit, safety couplers rated at 10,000 psi and 12 feet of power cord. 800/333-9274; www.watercannon.com/catalogrequest.aspx.