HydroLogex Introduces EnviroCAAT Treatment Module
The EnviroCAAT primary treatment module from HydroLogex LLC is a modified sequencing batch reactor that operates in a single vessel with continuous inflow and intermittent discharge, rather than the fill and draw process of a conventional SBR. When combined with the EnviroFilter secondary treatment PRMF, the system can deliver BOD and TSS below 5 mg/l and ammonia below 0.5 mg/l. The module also can be used as a stand-alone treatment system, delivering effluent BOD levels below 30 mg/l and TSS in the 30 mg/l range. 615/807-1405; www.hydrologex.com.
Infiltrator Introduces IM-1060 Septic Tank
The IM-1060 injection molded, plastic septic tank from Infiltrator Systems features a mid-seam joint with EPDM gasket for a watertight seal. The two-piece design is permanently fastened using a series of non-corrosive plastic alignment dowels and locking seam clips. The tank can be installed with 6 to 48 inches of cover and pumped dry. Other features include inboard lifting lugs, heavy-duty lids that interconnect with TW risers and pipe risers, structurally reinforced access ports to eliminate distortion during installation and reinforced structural ribbing and fiberglass bulkheads for additional strength. 800/221-4436; www.infiltrator systems.com.