When the Maine Association of Site Evaluators was looking for a way to celebrate SepticSmart Week in late September, they found an altruistic...
Onsite Septic Systems and ATUs
Sponsored by
Orenco Systems, Inc.
Displaying results 596-612 of 1383
Online Exclusives
Rules and Regs: Septic Systems Shut Down Due to High Water Levels in Lake Michigan
The LaPorte County (Indiana) Health Board took steps to shut down septic systems and halt construction because of rising water levels in Lake...
Online Exclusives
An Installer’s Guide to Nitrogen
The majority of the nitrogen present in raw sewage is from urea and fecal material, although small amounts are found in some...
Online Exclusives
Industry News: November 2017
SJE-Rhombus announces new manufacturers rep
SJE-Rhombus added FTI Sales of Elgin, Illinois, as the new manufacturers representative for its standard control product line in...
Online Exclusives
Finding the Right Installation Equipment Increases Efficiency
The pair of owners of North Iowa Septic Solutions in Mason City, Iowa, handles different aspects of the business workload, so they...
Editorial
Onsite and Community Systems, Municipal Repair Boost Revenue for Iowa Company
Despite only having a few years of construction-related experience between them, Dain Mann and Corey Nichols decided to join forces and form...
Editorial
The Good, the Bad and the Ugly of Wastewater News
With hundreds of emails received every week, constant Google alerts, social media and other direct contact with folks in the industry, I...
Editorial
Defining the Absorption Area of a Mound Treatment System
Recently, someone asked us how setback distances were determined for mound systems. In Minnesota, rules state setback distances must be measured from...
Online Exclusives
Onsite Arithmetic: O&M Problem
1. If the pump tank is 50-by-60-by-72 inches deep, calculate the gallons per inch.2. The off float is at 54 inches and...
Online Exclusives
Onsite Arithmetic: O&M Problem – Answers
Here are the answers to today's practice problem.1. If the pump tank is 50-by-60-by-72 inches deep, calculate the gallons per inch.Convert length...
Editorial
Hawaii Continues Effort to Eliminate Cesspools
Estimates say there are 90,000 cesspools in use across the Hawaiian Islands, and now their days are numbered. This spring, the state...
Online Exclusives
An Installer’s Guide to Wastewater Pathogens
Removing pathogens is the most critical part of wastewater treatment. Pathogens are organisms that cause disease; they include viruses, protozoa and bacteria....
Online Exclusives
An Installer’s Guide to Phosphorus
Phosphorus is a chemical element and nutrient essential for all life-forms. Organic phosphorus is formed primarily by biological processes, and its sources in sewage...
Online Exclusives
Rules & Regs: California Moves Toward Toilet-to-Tap, Australia Moves Away
Because it contains 12 percent of the country’s population, California sets standards in many ways. Now, the state government is working on...
Online Exclusives
An Installer’s Guide to FOG
FOG (fats, oils and grease) is a constituent of sewage, typically originating from food stuffs (animal fats or vegetable oils) or consisting...
Online Exclusives
Onsite Arithmetic: Setting Alarm Floats
1. If a pump tank has the following dimensions — 42 inches by 60 inches by 58 inches deep — what are the gallons...
Online Exclusives
Onsite Arithmetic: Setting Alarm Floats — Answers
Here are the answers to today’s practice problem.1. If a pump tank has the following dimensions — 42 inches by 60 inches by...













