Interested in Pumps?
Get Pumps articles, news and videos right in your inbox! Sign up now.
Pumps + Get AlertsAeration Pumps
HIBLOW XP-80
The HIBLOW XP-80 linear diaphragm air pump is equivalent in airflow to the HP-80, but utilizes a “rare earth” neodymium magnet, which allows the unit to run on less than 60 watts of power – comparable to an incandescent light bulb. The aerator has a small footprint and weighs less than 10 pounds, allowing for cost efficient shipping. It takes up less space in a service truck and in protective enclosures — allowing for more air circulation to cool the pump. The neodymium magnet helps the pump maintain a low operating temperature, assisting with optimizing pump service life. 734-944-5032; www.hiblow-usa.com
Kasco Marine Surface Aerators
Surface Aerators from Kasco Marine are easily installed with mooring ropes and designed to agitate high volumes of water. With continuous mixing action, water is constantly circulated through the unit to increase the amount of water introduced to air. This increases overall water quality and raises dissolved oxygen levels to the required standard before treated water is discharged. The units are designed for residential and commercial properties with minimal operator monitoring. Models are available in power options ranging from 1/2 to 5 hp with cord lengths up to 500 feet. Units are designed with a 360-degree top intake, allowing for greater flow and electrical efficiency, all while enabling use in shallow applications. 715-262-4488; www.kascomarine.com
Chopper Pumps
Gorman-Rupp SFSC Pump
The SFSC Pump from Gorman-Rupp is an SF Series product equipped with Eradicator Plus solids reduction technology. These are the most aggressive in the SF Series product lineup and are designed for applications where nonwoven flushable wipes, trash bags, hair, industrial byproducts and agricultural wastes are present. All pumps are equipped with a heavy-duty continuous vane impeller. The pumpout vanes incorporated into the thick back shroud are designed to help prevent buildup of debris behind the impeller. The wear plate utilizes notches and grooves with an oversized lacerating tooth designed to cut and shred organic solids before they enter the pump. Pumps are available in 3-, 4- and 6-inch discharge sizes. 419-755-1011; www.grpumps.com
Effluent Pumps
Boerger BLUEline rotary lobe pumps
Boerger BLUEline rotary lobe pumps are a self-priming, valveless, positive displacement pump used for conveying viscous and abrasive materials. They are resistant to wear and provide pulsation-free operation. Operation is fully reversible, with dry run capability and flow rates up to 7,000 gpm. They are constructed with maintenance-in-place design, allowing for all wetted parts to be easily replaced through the front cover without removing pipe or drive systems. The pump conveys biosolids (primary, waste activated sludge, return activated sludge, digested, thickened, etc.), grease, sewage, scum, lime slurry, alum sludge, permeate and polymers. 612-435-7300; www.boerger.com
Franklin Electric Little Giant WE Series
The Little Giant WE Series is built with a Franklin Electric submersible motor, designed to provide maximum durability and years of reliable service. It consists of a high-head filtered effluent pump powered by a 1/2 hp submersible motor and includes a removable built-in check valve. The high-quality top bearing and stainless steel upthrust washer add resilience and reliability, according to the maker. 800-437-6897; www.littlegiant.com
Webtrol VE and VS pumps
Webtrol VE and VS pumps are equipped with a continuous-duty motor that offers advantages such as reliable and uninterrupted operation. The energy-efficient motor is designed to run continuously without overheating or experiencing fatigue. It ensures durability and longevity, handling heavy-duty applications and demanding environments, according to the maker. Minimum maintenance is required. The pumps are versatile and suitable for various applications including dosing, lift stations and dewatering. 800-769-7867; www.webtrol.com
Wholesale Septic Supply ATER 20 Series
The ATER 20 Series effluent pump, distributed by Wholesale Septic Supply, passes solids up to 1/8-inch. This makes it easier to pump through the whole system. The bottom suction design allows the unit to pump longer, providing further draw-down capability and reliability. It has a removable 5-inch base that raises the pump from the tank bottom, preventing sludge from clogging the pump. The pump has a built-in check valve that keeps it pumping efficiently. It is constructed from 304 stainless steel for corrosion resistance. A heavy-duty 300-volt, 10-foot SJOOW cord is used. 936-681-7211; www.wholesalesepticsupply.com
Grinder Pumps
Liberty Pumps ProVore
The ProVore grinder from Liberty Pumps is designed for use in applications where addition of a bathroom or other fixtures below sewer lines requires pumping. It has the same V-Slice cutter technology used in the Omnivore Series. Powered by a 1 hp motor, this smaller grinder is designed to operate on a standard 115- or 230-volt circuit, requiring only a 20-amp breaker. No special wiring is needed. The pump comes with a 2-inch vertical-style discharge and a standard leg pattern matching the LE Series. This allows for easy retrofit into existing systems. Compact factory-assembled systems are available in simplex and duplex versions: the ProVore 380 and ProVore 680. 800-543-2550; www.libertypumps.com
Zoeller Pump 72 HD Series
Zoeller Pump’s 10 and 15 hp 72 HD Series is an expansion to its existing grinder product offering, now ranging from 1 to 15 hp. The units include a dual carbon ceramic shaft seal, moisture and thermal sensor, a buna-N gasket to protect the 3,450 rpm motor, and class F windings. Pumps are available in 208, 230, 460 or 575 volts using a three-phase connection. The 3- or 4-inch ANSI-flanged horizontal discharge allows for easy adaption to a variety of grinder or solids handling rail systems. Pumping performance ranges from 250 feet at shut-off and a maximum flow at 150 gpm at 50 feet TDH. Removable legs clear the bottom of the pump to allow debris to flow easier into the cutter assembly when used with a guide rail assembly. This assembly uses a 440 stainless steel with a Rockwell C hardness of 55-60 cutter and cutter plate in a scissor-like cutting motion that reduces solids down to 1/8 inch. 800-928-7867; www.zoellerengineered.com
Vertical/Lift Station Pumps
Saniflo Sanicubic 2 VX
The Sanicubic 2 VX lift station from Saniflo provides above-floor drainage for multiple plumbing fixtures for a commercial structure, eliminating the need for costlier and less convenient pit installations. Equipped with two 1.5 hp motors, the lift station is capable of discharging effluent through either 2- or 4-inch rigid pipe and offers a shut-off head of 43 feet. It employs an internal air pressure switch to automatically cycle the unit on and off. The unit also comes equipped with a wired control panel, as well as an external audible and LED indicator alarm if a pump experiences overload or ceases to operate. With easily removable circular top panels, the IP68 enclosure permits ready access to every major component inside. 800-363-5874; www.saniflo.co
Sump Pumps
Ashland Pump sump pumps
Ashland Pump offers sump pumps including the PS series, B series, the SPV series and sump basin package systems. The pumps are built of corrosion-resistant anodized aluminum or rugged cast iron. All are equipped with permanent split capacitors and continuous duty-rated motors for higher efficiency. They have an upper and lower ball bearing design for longer life and smoother operation. The vortex impellers are made of thermoplastic or cast iron to better handle up to 1/2-inch solids. They have contractor-grade vertical or wide-angle piggyback float switches for quick and easy field servicing. The sump basin packages come complete with sump basin, sump pump, check valve and discharge piping. They are suitable for new or replacement installations. 855-281-6830; www.ashlandpump.com
Submersible Pumps
Polylok PL-CPE4A
The Polylok PL-CPE4A is a submersible, 4/10 hp, 115-volt, single-phase effluent pump with a 2-inch NPT vertical discharge. It has a maximum head of 38 feet and a maximum flow of 56 gpm. The pump is designed with a 3,450 rpm oil-filled permanent split-capacitor motor and has an amp rating of 6.6 for 115 volts, a rugged cast iron housing and volute equipped with a cast iron vortex impeller capable of passing 3/4-inch-diameter solids. The stainless steel shaft is supported by two single-row, oil-lubricated ball bearings. The shaft seal is an inboard design with a secondary Exclusion V seal. It has a 20-foot UL/CSA-listed power cable suitable for submersible service and fitted with a three-prong plug. The unit is supplied with an integrated clip for the included piggyback mechanical float switch and used for automatic operation. 888-765-9565; www.polylok.com
Pump Controls
Alderon Industries GO2
The GO2 control panel from Alderon Industries provides pump control with basic system configuration options including sensor error input, auto or manual alarm reset, and lag alarm disable. A multi-color LED beacon provides system status indication on the exterior of the panel while the internal circuit board LEDs provide pump run and activated sensor indication. The control panel is operated using three or four float switches for pump off, lead, lag and high level alarm. In three-float applications the lag and alarm functions are activated simultaneously. Included hand-off-auto pump selector switches allow the user to change the desired operation of the pump. It is available in single phase, 120/240-volt AC, 1-7 amps, 7-15 amps or 15-20 amps, simplex and duplex, with a Type 4X rated enclosure for indoor and outdoor applications. It can be customized with optional float switch configurations and cloud based remote monitoring. 218-483-3034; www.alderonind.com
Jet Inc. Model 196 Control Panel
The Model 196 Control Panel from Jet Inc. is pre-wired and designed to control and monitor operation of Jet system aerators, as well as the function of one or two 120/1/60 or 240/1/60 pumps for flow equalization and various pressured distribution system applications such as time-dose, demand-dose and night-spray. The panel allows for optional cycle timer, cycle counter, remote telemetry and auxiliary alarms. All controls, audible and visual alarms are housed in a NEMA 4 control enclosure. 800-321-6960; www.jetincorp.com
Orenco Systems 4-in-1 Controller
The 4-in-1 Controller from Orenco Systems supports numerous electrical configurations and dosing schedules within a single panel. Both simplex and duplex models are available and can be configured in the field for timed or demand dosing. While the control circuit operates on 120-volt power, the pump circuit is dual-rated for 120- or 240-volt power, meaning installers and service providers can reduce their panel inventories for new installations and repairs. It includes a programmable logic unit with multiple timing intervals for changing flow conditions and an elapsed-time meter and counter. It also displays float position and has a float error indicator. Each panel includes a reference chart to assist with troubleshooting during installation and testing as well as wiring diagrams. It is completely touch-safe. 877-257-8712; www.orenco.com
SJE Rhombus EZ Series In-Site CL
The EZ Series In-Site CL data logging control panel from SJE Rhombus offers wireless Bluetooth connection for smart devices. There is no need to open the panel for configuration, viewing status or downloading data using the EZ Connect Mobile App. The Bluetooth smart module eliminates the need for a PC to enable safe and secure access in all weather conditions. The panel utilizes the C-level sensor for continuous level monitoring and records up to 4,000 system events, including pump run times, pump cycles, alarm conditions, HOA settings, power outages and service calls. The In-Site software formulates system data for you, creating reports quickly and easily so system conditions can be identified and corrected. Single phase simplex or duplex models are available. The panel can be easily converted to demand or timed dose in the field. 888-342-5753; www.sjerhombus.com
SPI 50B019-120-240 DD
The 50B019-120-240 DD control panel from SPI is a duplex timed-dosing panel for residential or commercial applications. It can be used with 120- or 240-volt power, and accommodates two dosing pumps controlled by a repeat-cycle timer. It has a durable, weather-resistant, NEMA 4X polycarbonate enclosure with SST latches; large, easy-to-access terminal block; circuit breakers for the pumps and control circuits; a rugged externally mounted, UV-resistant alarm light; audible alarm and run-mute-test switch with UV-resistant sealing boot; definite purpose motor contactors; alternating relay; and pump hand-off-auto switches. Compressor hookups are available. Wiring schematic and detailed connection diagrams are provided, as well as mounting feet for the enclosure. It is UL listed. 419-282-5933; www.septicproducts.com
