Product Focus: Large-Scale and Commercial Treatment Systems

Product Focus: Large-Scale and Commercial Treatment Systems

Interested in Systems/ATUs?

Get Systems/ATUs articles, news and videos right in your inbox! Sign up now.

Systems/ATUs + Get Alerts

ATU

Anua Synergy BioCoir QuadMod

The Synergy BioCoir QuadMod from Anua is focused on the small commercial market. Systems are a recirculating media biofilter that utilize coconut coir housed in a preassembled pod. Pretreated effluent is time-dosed over the coir media using helical spray nozzles for uniform distribution. After passing through the media, effluent travels to the bottom of the pod and the flow is split, with 80% returning back into the treatment stream and 20% to the final dispersal point. They are designed for both burial and portability by featuring an I-beam steel frame that allows the unit to be picked up and moved. Measuring just over 19 feet long, 7.38 feet wide and 3.42 feet tall, QuadMod systems are designed to fit in standard shipping containers for worldwide transport. 336-547-9338; www.anuainternational.com


Commercial Treatment Systems

Eliminite Commercial C-Series

The Commercial C-Series system from Eliminite is designed to provide reliable treatment with emphasis on total nitrogen reduction for high-strength waste applications such as worker camps, RV parks, restaurants, ski and golf resorts, breweries, mines and agricultural operations. It may be used with locally sourced tanks and components. MetaRocks treatment media is designed to withstand a variety of high-strength waste-loading scenarios, particularly where clogging and odor control are major considerations. The system is scalable and may be adapted to suit specific phasing requirements, site constraints and unique demands. 888-406-2289; www.eliminite.com


Jet Inc. Commercial Systems

Commercial wastewater treatment extended air plants and newer MBBR plants from Jet Inc. are modular, can treat varying strengths and flows from 1,500 to 300,000 gpd and allow for phase build-out. This makes it possible for convenience stores, motels, shopping centers, service stations, factories and subdivisions to be constructed far from municipal treatment options. These systems may also be used for pretreatment before discharging into central systems to reduce overall system load. The time-tested plants utilize a variety of controls and treat wastewater through an aerobic digestion process that enables microscopic living organisms to transform wastewater into a clear, odorless liquid. 800-321-6960; www.jetincorp.com


MicroSepTec EnviroServer ES

The MicroSepTec EnviroServer ES (Extended Storage) is designed for residential and commercial applications. It utilizes pre-engineered, prefabricated MBBR technology. In residential settings, it combines various processes to remove contaminants to ensure safe disposal or reuse of water. The system is designed to be compact, easy to install and low-maintenance, making it suitable for homes and small communities. It also offers efficient wastewater treatment solutions for businesses, commercial buildings and larger establishments, with its extended storage capacity allowing processing of higher volumes of wastewater. 877-473-7842; www.microseptec.com


Norweco Modulair

The Modulair package wastewater treatment system from Norweco is a reliable, maintenance-free method of wastewater treatment available for commercial, industrial or small municipal applications. With system capacities ranging from 1,500 to 500,000 gpd, plants are pre-engineered to accommodate current and future treatment needs. They employ the extended aeration treatment process to quickly and efficiently oxidize organic compounds in the most cost-effective manner. Systems can be easily enlarged or modified and have the flexibility for any treatment requirement, including pretreatment, AFE, ASH, tertiary, disinfection, denitrification and phosphorus removal. Nonclog Evenair diffusers reduce plant maintenance and the Air-lift surface skimmer simplifies maintenance. Heavy-duty reinforced precast concrete tanks provide durability and long life to each plant. Systems are installed and serviced by local, licensed, factory-trained distributors. They are sold complete, including delivery, tank setting, equipment installation, startup and service. 800-667-9326; www.norweco.com


Orenco AdvanTex AX-Max

AdvanTex AX-Max wastewater treatment systems from Orenco are containerized, fully plumbed units sized for larger commercial and municipal applications. Units come in a variety of configurations, measuring up to 42 feet long by 8.5 feet wide. Systems can be installed in single or multi-unit arrays, either above ground or buried to grade. They use an attached-growth treatment method to produce clear effluent with significant nutrient reduction, suitable for reuse or surface discharge after disinfection (per local regulations). One unit can process up to 5,000 gpd of raw sewage or 15,000 gpd of primary-treated effluent. Units reduce nitrogen to 90% or more, depending on configuration, and provide reliable performance with a part-time operator. Units are easy to ship and set, and have been installed in a variety of soils and climates. 800-348-9843; www.orenco.com


Control Panels

SJE Rhombus EZ Series In-Site CL

The EZ Series In-Site CL data logging control panel from SJE Rhombus offers wireless Bluetooth connection for smart devices. There is no need to open the panel for configuration, viewing status or downloading data using the EZ Connect Mobile App. The Bluetooth smart module eliminates the need for a PC to enable safe and secure access in all weather conditions. The panel utilizes the C-Level sensor for continuous level monitoring and records up to 4,000 system events, including pump run times, pump cycles, alarm conditions, HOA settings, power outages and service calls. The In-Site software formulates system data for you, creating reports quickly and easily so system conditions can be identified and corrected. Single-phase simplex or duplex models are available. The panel can be easily converted to demand or timed dose in the field. 888-342-5753; www.sjerhombus.com


SPI 50B019-120-240 DD

The 50B019-120-240 DD control panel from SPI is a duplex timed-dosing panel for residential or commercial applications. It can be used with 120- or 240-volt power, and accommodates two dosing pumps controlled by a repeat-cycle timer. It has a durable, weather-resistant, NEMA 4X polycarbonate enclosure with SST latches; large, easy-to-access terminal block; circuit breakers for the pumps and control circuits; a rugged externally mounted, UV-resistant alarm light; audible alarm and run-mute-test switch with UV-resistant sealing boot; definite purpose motor contactors; alternating relay; and pump hand-off-auto switches. Compressor hookups are available. Wiring schematic and detailed connection diagrams are provided, as well as mounting feet for the enclosure. It is UL-listed. 419-282-5933; www.septicproducts.com


Zoeller Pump Pivot

Pivot control panels from Zoeller Pump employ microchip technology and logic to allow for a long list of standard features. The panel is capable of detecting, reacting and notifying of problems with float switches. It can also detect bad components like contactors, overloads and seal fail circuits. This means a warning is provided before the failure results in property damage. It has a simple interface and can be modified for most applications. 800-928-7867; www.zoellerpumps.com


Filter Media

E-Z Treat Re-Circulating Synthetic Media Filter

E-Z Treat manufactures NSF 350 water treatment reuse applications throughout the United States. The biological-based treatment system Re-Circulating Synthetic Media Filter produces high-quality effluent to accommodate a wide variety of flows for residential and commercial sites, whether subsurface or surface discharge. 703-753-4770; www.eztreat.net


Eljen Geotextile Sand Filter

The Eljen GSF, or Geotextile Sand Filter system, is designed to provide treatment and dispersal in the same footprint with easy installation and minimal maintenance. It is used for commercial and residential applications. Utilizing a two-stage pretreatment process, the geotextile modules apply filtered septic tank effluent to the soil, increasing the soil’s ability to accept effluent and increase the long-term acceptance rate. Its design provides increased surface area for biological treatment that greatly exceeds the module’s absorption area. Open-air channels within the module support aerobic bacterial growth on the module’s geotextile fabric interface, surpassing the surface area required for traditional absorption systems. The system is tested and certified by NSF to NSF/ANSI Standard 40. 800-444-1359; www.eljen.com


Infiltrator Water Technologies ECOFILTER Pump Vault

The ECOFILTER Pump Vault tank filtration system from Infiltrator Water Technologies reduces biological loading and clogging, prolonging the life of downstream drainfields and other treatment systems. Quick to install in new or existing tanks, the vault is a completely integrated system for pumping effluent from single or double compartment tanks. It draws effluent from the clarified zone of the tank to minimize suspended solids passing through the pump system. The easy-access design maximizes the filter surface area and simplifies filter inspection and maintenance by enabling filter cartridge removal without pulling the pump or vault. Featuring a dual compartment housing for simplex or duplex applications, the product is constructed of high-density polyethylene with UV inhibitors for longevity and the float stem bracket allows easy removal and adjustment of the float assembly. Customizable for nearly any project need, the unit is suitable for S.T.E.P. collection systems and effluent treatment. 800-221-4436; www.infiltratorwater.com


Pumps

Crane Pumps & Systems envie3

The envie3 air-filled motor series dry pit submersible pump from Crane Pumps & Systems can run in wet applications and in dry pits. These pumps outfit Barnes’ and Deming’s nonclog and chopper wet ends with a premium efficient/IE3 motor that can run in both vertical and horizontal configurations. The closed-loop glycol cooling system allows for easy maintenance and installation in demanding applications. For easy serviceability, the horizontal installation options include a cart system, which creates a back pullout option as well as a fixed bracket configuration. Install horizontally for a smaller footprint. Vertical installation configurations include a metal and concrete stand that allow for 360-degree rotation for conveniently adapting to existing piping, including tangential discharge pumps. 937-214-9008; www.cranepumps.com


Franklin Electric Little Giant Pit+Plus

The Little Giant Pit+Plus package from Franklin Electric is designed to provide an all-in-one solution for light-duty wastewater management. Each package includes a roto-molded polyethylene basin — the pit — combined with the user’s choice of Little Giant pump. The addition of the 1 hp grinder pump option joins the already available 4/10 and 1/2 hp sewage pump choices. The basin is available in two sizes: the 24x24 JR or 20x30 SR. The Little Giant 16G Series 1 hp grinder pump has a cutting mechanism modeled after the unique design used in larger Franklin Electric models. The heavy-duty 1 hp class F motor provides power to prevent flushables and other debris from clogging and causing downtime. 844-250-4982; www.littlegiant.com


Liberty Pumps ProVore

The ProVore grinder from Liberty Pumps is designed for use in applications where addition of a bathroom or other fixtures below sewer lines requires pumping. It has the same V-Slice cutter technology used in the Omnivore Series. Powered by a 1 hp motor, this smaller grinder is designed to operate on a standard 115- or 230-volt circuit, requiring only a 20-amp breaker. No special wiring is needed. The pump comes with a 2-inch vertical-style discharge and a standard leg pattern matching the LE Series. This allows for easy retrofit into existing systems. Compact factory-assembled systems are available in simplex and duplex versions: the ProVore 380 and ProVore 680. 800-543-2550; www.libertypumps.com


Polylok PL-CPE4A

The Polylok PL-CPE4A is a submersible, 4/10 hp, 115-volt, single-phase effluent pump with a 2-inch NPT vertical discharge. It has a maximum head of 38 feet and a maximum flow of 56 gpm. The pump is designed with a 3,450 rpm oil-filled permanent split-capacitor motor and has an amp rating of 6.6 for 115 volts, a cast iron housing and volute with a cast iron vortex impeller capable of passing 3/4-inch-diameter solids. The stainless steel shaft is supported by two single-row, oil-lubricated ball bearings. The shaft seal is an inboard design with a secondary Exclusion V seal. It has a 20-foot UL/CSA-listed power cable suitable for submersible service and fitted with a three-prong plug. The unit is supplied with an integrated clip for the included piggyback mechanical float switch and used for automatic operation. 888-765-9565; www.polylok.com


Storage Tanks

Roth North America MultiTank

The MultiTank from Roth North America can be used for water cistern, pump, holding, rainwater or septic tank applications. This is possible due to its inner layer of FDA-approved virgin HDPE, two inside layers of polyethylene for improved stability, plus one outer layer of black and UV-stabilized polyethylene. Features include CSA, NSF and IAPMO certification, a COEX-4 multilayer co-extrusion process, a low-profile design for less digging and avoiding high water tables, lightweight construction, a multiport inlet/outlet convenient for field piping, the ability to enter and exit the tank on the ends or sides, two 24-inch manways to provide easy access for maintenance and service, a cylindrical shape requiring no water for backfill, a threaded riser system and watertight, seamless construction. 866-943-7256; www.rothmultitank.com


UV Disinfection

Premier Tech Water and Environment Ecoflo Biofilter

The Ecoflo Biofilter with integrated UV disinfection from Premier Tech Water and Environment comes with all components pre-assembled and the float preset. On site, the UV unit is set in place and wires are connected. Certified under BNQ standard NQ-3680-910, the pressurized UV system complements the Biofilter’s treatment performance. It is tested for cold climates and regulated for maximum exposure time for year-round disinfection of less than 2 CFU/100 mL. Premier Tech’s team changes the UV bulb during annual maintenance visits. 800-632-6356; www.premiertechaqua.com


Wastewater Reuse System

Front Range Precast FLXX Concrete Tanks

For car washes, the main challenge has always been water conservation. By recapturing and treating water on-site, commercial car washes use about 65% less water and also drain their detergents into city sewer lines, not storm drains — which can lead to waterway contamination. FLXX Concrete Tanks from Front Range Precast provide all-in-one treatment and storage systems, ensuring water is used multiple times before being drained correctly into city sewers. The company’s latest system, installed for Beacon Construction in Mead, Colorado, utilizes three 2,000-gallon FLXX tanks to treat and store water on-site. 800-783-3207; www.flxx.com



Discussion

Comments on this site are submitted by users and are not endorsed by nor do they reflect the views or opinions of COLE Publishing, Inc. Comments are moderated before being posted.