The STF-100A2 pressure filter from Sim/Tech Filter helps maintain proper and efficient year-round operation of mounds, sand filters and other pressurized distribution systems. The low head loss (0.21 psi) unit mounts on the discharge side of an effluent pump, acting as a last line of defense to prevent plugged holes and reduce effluent TSS. This mounting location also extends the time between servicing. The vortex action created by the pump scrubs the screen and the backflow through the filter after the pump shuts off, washing debris out. A 2-inch filter can handle flow rates up to 83.8 gpm. The filters in the manifold can be designed to handle almost any flow rate or load. Larger 3- and 4-inch filters are also available. The standard screen filters particles to 1/16 inch, and optional socks allow for additional filtration to 600, 190 or 100 micron. 888/999-3290; www.simtechfilter.com.